NDT Penetrant Tech Level II

Production - Manufacturing
Tilton, NH, US
Job ID: 22888
Req ID: 175237.1
Job Type: Full-time
Date Posted: 2019-08-15 14:01:28
• Set up and standardize equipment, process parts, interpret and evaluate indications for acceptance or rejection, and document results.
• Be thoroughly familiar with the scope and limitations of the PT method.
• Be capable of providing the necessary guidance and or supervision to trainees and Level 1 personnel.
• Be capable of reading and applying controls as required by customer specifications, codes, standards, and engineering drawings that control the PT method.
• Be capable of developing work instructions from general procedures for approval by the Responsible Level III.
• Have a basic knowledge and understanding of the investment casting process as well as the TIG welding process. 
• Must be confident and capable to perform PT inspections on the most complex castings.
• Demonstrate the ability to utilize all special inspection equipment including UV borescopes with a high degree of accuracy.
• Must have the proven ability to consistently and adequately detect, evaluate, and identify the type or nature of surface indications to determine part conformance to the established acceptance criteria and with a degree of inspection accuracy that ensures defect escapes are a rare event.
• Must be capable of determining the most economical action needed to repair defective conditions by welding, blending, or other repair operations when allowed.
• Complete all required inspection records, certifications, and originate rework operations to repair castings using a variety of internal forms.
• Must have the Ability to direct, perform, and document all process control checks as required. (duplicated remove)
• Must be able to communicate effectively with Engineering or Supervision on technical matters or test results.  
• Detect faulty operations, defective material or equipment, and report these and any unusual conditions to proper supervision. 

• Must comply with all applicable safety requirements, policies and procedures, while maintaining a clean, safe, and orderly work environment.
• Must participate in required training, medical monitoring, safety, and health evaluations and programs.
• Must wear required Personal Protective Equipment (PPE) in all designated areas of facility.
• *Perform all physical functions of position; standing, stooping, bending, sitting, walking, twisting, kneeling, turning and lifting of materials up to 50 lbs.
• Meet established attendance standards.
• Work overtime as needed.
• Must report any work-related injury or illness immediately to your direct supervisor.
• Perform other duties as assigned.

• High school diploma or GED preferred but not required.
• Must meet the minimum experience and classroom training elements as required by NAS 410 and PCC Procedure RI 4.1 for certification to Level II.
• Must successfully pass all qualification and requalification exams without restrictions and maintain certification as a PT Level II inspector. 
• Use simple shop mathematics.
• Work from engineering drawings, specifications, charts and tables.
• Use various types of precision measuring instruments.
• Apply specialized technical or trades knowledge equivalent to 5 years of trade training.
• More than 5 years casting experience performing inspections as a certified PT Level 1 Inspector Technician A and with the demonstrated ability to perform reliable and accurate inspections on the most complex castings using all specialized inspection equipment including UV borescope.  
• If internal certification is revoked for audit failure or excessive returns, the technician will not qualify for this position for 2 years from the date of revocation. 
While performing the duties of this job, the employee is frequently required to stand, walk, twist, turn, talk, and/or hear. The employee is occasionally required to sit, kneel, stoop, bend, and use hands to finger, handle, or feel. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include: close vision, color vision, peripheral vision, depth perception and ability to adjust focus.